manualshive.com logo in svg

Reynolds Building Systems Best Barns Meadowbrook-R, Assembly Book, Page: 8 / 20

Share
Download
Reynolds Building Systems Best Barns Meadowbrook-R Assembly Book Download Page 8

Step 5

Install Gable Trim & Loft Doors

3.

Install 29-1/4" long 1x3 trim boards on each side of the loft door opening.

Install  a 43" long trim board across the top.

4.

Install loft doors using  4" hinges and 1-1/4" long hinge screws. The screws

have a square head. The bit is packed with the screws. Install barrel bolts to
the inside top of the doors to prevent doors from opening.

2x3-47" Board

1.

Apply 47" long 2x3 boards to  the gable. These boards have a blue marking on one end.

Install this end at the peak. Install boards flush with the top of the gable frame.

2.

Install a 42-1/4" long 2x3 at the sides of the gable, flush with the frame.

5.

Apply 1x4 white pine trim to gable. Install a 47" long 1x4 at the top of the gable. These

boards have a blue marking on one end. Install this end at the top. Install trim flush with
the top of the gable frame. Use 8d galv. nails.

6.

Install a 42-1/4" long 1x4 at the sides of the gable, flush with the frame.

Summary of Contents for Best Barns Meadowbrook-R





















Reviews:

No comments