X
X
X
X
X
X
X
X
X
X
2.
Install (7) seven 72" wall studs between the top and bottom plates. Assemble wall frames with
10d sinkers, (2) two nails at each stud end. Nail both wall frames together.
3.
Square wall frame.
4.
Cut a full width siding panel in half lengthways. Select the cutoff with the 'Tongue' edge. Install
this siding panel with the cut edge extending 3-1/2" past the wall frame. The bottom will extend
3/4" below the bottom plate.
5.
Install two (2) full width siding panels.
A B
A B
A
B
Step 2
Assemble 116-1/2" Long Sidewall - No Doors
1.
Position (2) two 68-1/2" and (2) two 48" long 2x4 boards together and indicate with 'X'
marks, where the wall studs will be located. Mark the ends that will butt together with the
letters 'A' and 'B'.
68-1/2" Wall Plate
24"
19-3/4"
23-1/4"
48" Wall Plate
68-1/2" Wall Plate
2x4-72" Wall Studs
48" Wall Plate
Siding Extends 3-1/2"
Past 2x4 Stud
Tongue edge
Cut edge
Siding Extends 3/4" Below Plate
