background image

------------------------

 

Introduction

 

 

Overview 

The AcroGear series, fully compatible with USB specification, are the 
combination of USB KVM (keyboard/Video/mouse) switch and USB 
peripherals sharing device. You can easily operate up to 4 PCs, G3/G4 Macs, 
or Mac Pros respectively from 1 USB keyboard, 1 USB mouse, and 1 DVI 
monitor saving you space, time, equipment and money.    Its peripheral sharing 
function enables you to share more USB peripherals among all computers. 
The “FUNC” button for selecting the audio and adjusting the video signal 
strength. Yet, the AcroGear series support the audio function (S MIC) 
as well. Users can switch among four media sources and enjoy the output on 
one single display and one set of speakers. 

 

Installation is as easy as connecting USB A-B cables to computers and to the 
AcroGear series.  Computer selecting is as easy as front panel button 
pressing.    The built-in USB hub ensures smooth switching from one computer 
to the other.    The AcroGear series provide the easiest way to manage multiple 
computers with USB interface and share USB peripherals among computers. 
No more tangled cables and messy working environment; let the AcroGear 
series do the computer switching for you.

 

 

Features 

 Support DVI Single Link with the resolution up to 1920 x 1200 @ 60Hz 

 

2/4

 computers share up to 4 different USB peripherals 

 Front panel push buttons for easy computer selection 

 Front panel FUNC button fore easily adjusting the video signal strength 

 Front panel FUNC button for easily selecting the audio 

 No drivers needed for keyboard and mouse operation 

 Support keyboard and mouse plug-n-play 

 Buzzer sound for computer switching confirmation 

 Activate Auto Scan by front buttons pressing 

 Selectable Scan Time interval 

 Support the DVI monitor 

 Saves time, space, equipment and power 

 USB self-power operation 

 No software required 

 Hotkey functions allow easily computer access

 

 Support Windows and Mac host systems 

 Support dual DVI displays (for DADG-122 / DADG-124 only) 

 

1

Summary of Contents for AcroGear Series


















Reviews: