REXON SM2158R, Instruction Manual

Page: 6 / 32

6
WARNING!
● Ensure that the arm is securely
fixed when bevelling;
● Keep the floor area around the
machine level, well maintained
and free of loose materials e.g.
chips and cut-offs;
● Use correctly sharpened saw
blades.
● Observe the maximum speed
marked on the saw blade;
● When fitted with laser, no
exchange with different type of
laser is permitted. Repairs shall
only be carried out by the laser
manufacturer or an authorised
agent. Refrain from removing
any cut-offs or other parts of the
workpiece from the cutting area
whilst the machine is running and
the saw head is not in the rest
position;
● Ensure that the machine is always
fixed to a bench, whenever
possible.
12. The laser fitted onto this miter saw
is only designed for this saw. The
fitting of any external, additional
or different type of laser is not
permitted. Repairs should only be
carried out by authorised repair
agents.
13. Refrain from removing any cut-offs
or other parts of the workpiece from
the cutting area whilst the machine
is running and the saw head is not
the rest position.
14. Never stand on this tool as damage
to saw or serious injuries could
result.
15. Never use the miter saw near
flammable liquids, vapors, or gases.
16. Remove all nails that may be in the
workpiece to prevent sparking that
could cause a fire.
17. To avoid fire or toxic reaction, never
use gasoline, naphtha acetone,
lacquer thinner or similar highly
volatile solvents to clean the miter
saw.
18. Keep the saw with proper footing
on a table to decrease noise and
vibration.
19. Always use the designated carrying
handle for transportation.
20. Never use the miter saw to make
miter cutting, bevel cutting or
compound cutting on metals.
SYMBOLS
V …....... volts A ……..….. amperes
Hz…...... hertz W..….……....... watts
min….... minutes h ………......... hours
I ………..ON O…................... OFF
~ …....... alternating current
.......... Class II Construction
min
-1
…... revolutions per minute
9. The operator must be adequately
trained in the operation of miter saws
and their components.
10. Wear suitable personal protective
equipment when necessary, this
could include:
● hearing protection to reduce the
risk of induced hearing loss;
● eye protection;
● respiratory protection to reduce the
risk of inhalation of harmful dust;
● gloves for handling saw blades
(saw blades shall be carried in a
holder wherever practicable) and
rough material.
11. Make sure there is adequate lighting
provision for your work area.