Malfunction
Solution
The display remains empty when the device is
switched on. The batteries are inserted.
1. Check batteries for correct polarity.
)FTHEDISPLAYISUNUSUALREINSERTTHEBATTERIESOR
exchange them for new ones.
The pressure does not rise even though the pump is
running.
Check the connection of the cuff tube and connect
properly if necessary.
The device frequently fails to measure the blood
pressure values, or the values measured are too low
or too high.
1. Check the positioning of the cuff.
2. Measure the blood pressure again, ensuring that
YOUHAVEREMAINEDMOTIONLESSFORASUFlCIENT
amount of time to ensure an accurate reading.
Every measurement produces varying results
although the instrument functions normally and the
values displayed are normal.
.OTETHATBLOODPRESSUREmUCTUATESCONTINUOUSLY
therefore measurements will show some variability.
Blood pressure values measured differ from those
measured by the doctor.
Record the daily development of the values and
consult your doctor.
Note:
Individuals visiting their doctor frequently
experience anxiety which can result in a higher blood
pressure reading than at home.
6. Care and Maintenance
a) Do not expose the device to either extreme temperatures, humidity, dust or
direct sunlight.
B 4HECUFFCONTAINSASENSITIVEAIRTIGHTBUBBLE(ANDLETHISCAREFULLYANDAVOIDALL
types of stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gas, thinners or similar
SOLVENTS3POTSONTHECUFFCANBEREMOVEDCAREFULLYWITHADAMPCLOTHAND
soapsuds. The cuff with bladder must not be washed in a dishwasher, clothes
washer, or submerged in water.
d) Handle the tube carefully. Do not pull on it. Do not allow the tubing to kink and
keep it away from sharp edges.
e) Do not drop the monitor or treat it roughly in any way. Avoid strong vibrations.
f)
Never open the monitor.
This voids the manufacturer’s warranty.
g) Batteries and electronic instruments must be disposed of in accordance with the
locally applicable regulations, not with domestic waste.
