2
In order to use the device for a maximum long time and without problems, as well as
to be able to use all of its options, please read carefully the whole instruction
manual and observe the directions in it.
The standard set of
VEGA
comprises:
- searching frame of 1x1m. /1,20x1,20m/
- control unit with built in accumulator;
- automatic charger for 220 V;
- detailed instruction manual for operation.
I f a n y o f t h e s e i t e m s a r e m i s s i n g , i m m e d i a t e l y i n f o r m u s , o r o u r a u t o r i z e d d e a l e r
w h e r e y o u p u r c h a s e d y o u r d e t e c t o r .
VEGA
has the following parts for control:
-
“
O N / V OLUM E
” – switches on the detector and volume control.
-
“
THERESHOLD
” – used to adjust threshold level. Rotate the controller
c o u n t e r- clock wis e to lo w positi on to a voi d interf er ence. Cl ock wi se rotate
t h e c o n t r o l l e r t o h a ve h i g h hu m le vel .
-
“
D EL AY
” – sampling delay control knob .
-
“
GND /
DISC
” – dual control knob – adjust ground balance in
ALL METAL
mode, and
discrimination in
DISC
mode.
- Butt on
“
DISC
” –
switch on and switch off
DISC
mode
- Butt on
“
MODE
” – toggling between
Dynamyc
and
Static
modes
- Butt on "
T U N E
"
– serves for automatic setting of the device to ground
c o n d i t i o n s o f t e r r a i n wh e r e i t w o r k s i n
St ati c
mo de .
-
B u t t o n
“
LIGHT
” –
switch on and switch off LCD back light.
- Jack
CHARGE
–
to charging storage batteries
-
LCD
for graphic display pointing level of signal and discrimination, selected modes and the
batteries status.
1. Assembling of the device:
Assembling the
VEGA
is simple and you don’t need any special tools.
