Rex Electrolux CA 962 ALU, Instruction Booklet

Page: 10 / 15

19
Part 1 - INSTALLATION INSTRUCTIONS
4.4 - Ducting or recirculation fitting
1 - Ducting fitting.
This is possible for all forms of installation:
a) Connect the air outlet to the external ducting system.
b) Remove the activated charcoal filter (if there is one) inside the
hood canopy (see Maintenance).
2 - Recirculation fitting
This is only possible with the air outlet directed upwards. Fit the
venting grille
G onto the air outlet ( Fig. 25 ). The activated charcoal
filter should be fitted inside the hood canopy after connection to
the power supply.
4.5 - Connection to power supply and checking of good
working order
1 - It is absolutely necessary to follow the warnings 3.2, 3.3 and 3.4 of paragraph 3,
concerning safety measures.
2 - Loosen the two locking screws and remove the metal cover (fig.26).
Connect the hood connection to the engine connection (fig.27a). Correctly place the
connectors under the cover and tighten the two locking screws (fig. 27b) .
3 - Once electrical connection has been carried out, check that lights, engine and change
of speed work
4 - Fit the lower grill and the activated carbon filter (only for filter mode) (see Maintenance).
27b
S36_27
27a
S07_23
25
S36_26
26