REWIRE SECURITY DB3, User Manual, Page: 28 / 122

log their start and stop points, view driven total distance. The event will be
generated (included into send records) only when the trip starts and finishes.
If Private / Business trip is configured, then by default private trip will start,
unless before turning the ignition on remote control’s button is pressed. In case
of standard trip functionality, at the beginning of the trip event will be
generated with value “1”. In case of Private/Business trip, the value of trip start
will be “2” or “3”, “2” being a private trip and “3” – business.
Note : Scenarios and Trip features are activated only if Ignition (Configured to
be detected by Power Voltage, Ignition or Accelerometer) is turned on.
5.4.3
Geofencing
Geofencing is another feature which is highly customizable and can detect
wherever car enters or leaves customized areas. More about Geofencing can
be read in 5.11.3 Geofencing settings chapter.
Auto Geofencing feature if enabled is activated automatically by turning off car
Ignition (Configured to be detected by Power Voltage, Ignition or
Accelerometer). Next time before driving user has to disable Auto Geofencing
by turning on car ignition (Configured to be detected by Power Voltage, Ignition
or Accelerometer). In case of theft, the car leaves Auto Geofencing zone
without authorization DB3 Plug&Play device automatically sends high priority
record to AVL application.
5.5 Configuration
Installing DB3 Plug&Play for configuration :
 Plug in device to OBD-II power adapter (accessory is optional).

Connect output wires to DC power source (10-16V).
 Plug in USB mini cable.
 Open configurator and configure your device.