STUDIO
MASTER T700 Turntable
13
Technical Data T700
MC Phono Preamp
Frequency response:
7 Hz ... 80 kHz (-3dB)
Signal-to-noise ratio:
- 69 dB (20 Hz … 20 kHz)
Distortion:
0.005 %
Channel deviation:
0.2 dB
Channel separation:
greater 80 dB
Subsonic filter:
10 Hz with high-pass 1. order (6 dB filter)
RIAA accuracy:
± 0.2 %
Impedance matching:
6 steps: 47 Ω,
100 Ω*
, 220 Ω, 470 Ω, 1 kΩ, 2 kΩ
(Intermediate values possible through parallel connection)
Input sensitivity:
4 steps: 150 µV,
300 µV*
, 600 µV, 1200 µV
* Preset factory values for the MC system
Ortofon Quintet Bronze
Tonearm
Pick-up
Tonearm with cardan bearing
Model:
Ortofon Quintet Bronze MC Q 20
Material tonearm tube: carbon
Output voltage:
0.3 mV (1000 Hz, 5 m/s)
Effective length:
237.6 mm (9,35 inch)
Frequency range:
20 – 25000 Hz (- 3 dB)
Overhang:
15 mm (variable)
Channel deviation:
< 1.0 dB
Crank angle:
23.96° (fixed)
Channel separation:
> 23 dB (1 kHz)
Dynamic mass:
11 g
Channel separation:
> 15 dB (15 kHz)
Tracking ability
80 µm (at racking force 2.3 g/ 315 Hz)
Compliance:
15 µm/ mN
Stylus type
Nude Fine Line
Stylus tip radius:
r/R 8/40 µm
Tracking force range:
21 – 25 mN (2.1 – 2.5 g)
Tracking force, recom. : 23 mN (2.3g)
Tracking angle:
20 degrees
Internal impedance:
5 Ohms (DC)
Cartridge weight:
9 g
Drive
Speed:
33⅓ / 45 revolutions per minute
Synchronization:
<
0.1%
Connections:
Line-Out analogue (cinch stereo)
DC socket
Dimensions:
470 x 337 x 156 mm (WxDxH) without sockets
Overhang (backside):
16 mm (hinge, RCA sockets)
Power:
0.2 W (standby after 30 sec.)
2.7 W (33⅓ or 45 U/min)
Mains voltage:
100 - 240 VAC / 50-60 Hz
Supply voltage T700:
12 - 15 VDC = / min. 1 A
Weight:
10.3 kg in total
2.85 kg turntable POM (polyoxymethylene)
0.21 kg sub-platter aluminum
5,0 g (anti-skating weight
9 mm)
1,8 g (anti-skating weight
6 mm) - alternative
Subject to errors and technical changes.
Copies and prints, including extracts, require the written approval of Revox Deutschland GmbH.