12
STUDIO
MASTER T700 Turntable
Tonearm scale
Revox delivers the T700 with a digital tonearm scale in the accessory box for precise determination of the tracking force. This
allows you to set the tracking force recommended by the manufacturer of the cartridge to an accuracy of 0.01 g. A test weight
of 5.0 g is included in the accessories box for checking the measurement accuracy.
The scale plate is very sensitive and therefore has a protective cover that can be pulled off to the right. The protective cover
should be used when the balance is not in use.
The tonearm scale has 3 buttons with the following functions:
Measurement
Switching between different units of measurement.
Power
Switches the tonearm scale on and off. There is an automatic switch-off function after approx. 120 seconds.
Tare
This key can be used to perform a zero adjustment. To do this, the scales must be placed on a flat, horizontal surface. If the tare
key is pressed and held, the currently measured weight is classified as a value of
0
. After resetting the supplied test weight, the
tonearm scale should show a value of 4.98 - 5.02 g.
Fig .: Remove protective cover from tonearm scale
Fig .: Tonearm scale open
Calibration
A calibration should only be carried out if there are problems with determining the tracking force or the enclosed test weight of
5.00 g is not displayed correctly.
Procedure
: Switch on the scale with the power button
and wait until the scale shows 0.00 g. Now press and hold the
power button
until the display shows
- 0 -
. Wait until the displays
flash
the required test weight of
5.00 g
. Now
place the enclosed 5 g test weight on the scale. The display now shows 5.00 g
continuously
and ends the
calibration process with the display
PASS
. If you now remove the test weight, 0.00g appears. The calibration is
complete.
Technical data
Measuring range: 0 - 5.00 g
Units:
grams [g], Ozen [OZ], Gran [GN], carat [Ct], Tael [TL], Ounce [ozt]
Batteries:
2 lithium batteries with 1.5 V, e.g. LR43, AG12, 186
Accessories
The scope of delivery of the
STUDIO
MASTER T700
includes a high-quality accessories box in which both the
sensitive turntable components such as the tonearm
weight as well as the adjustment and care products for
playing records are kept.
1) hexagon socket wrench 1.5 mm (e.g. azimuth)
hexagon socket wrench 2.0 mm (system change)
hexagon socket wrench 3.0 mm (tonearm height)
2) tonearm scale
3) drive belt
4) control weight for tonearm scale [5g]
5) record brush
6) anti-skating weight T700
7) tonearm weight T700
8) circular level
