Revox Re:source M217, Instruction

Page: 5 / 38

Walldisplay 217 Re:control
Safety Guidelines
An incorrect installation of this
device in an environment with
low voltage devices (230V) can
cause serious health issues and/
or material damage.
This device should only be
connected to extra low voltage
and never to low voltage (230V)
circuits .
The product should only be
installed, connected or removed
by qualified personnel. Qualified
personnel are people who,
through their training,
experience and knowledge of
corresponding norms, directives
and accident prevention
guidelines, are authorised to
carry out the required activities
and who can recognise and
avoid potential dangers.
The details and instructions
contained in this Installation
manual must always be taken
into account to prevent danger
and damage.
Installation
Installation of the wall display
in combination with a low
voltage device (power
connection) should only be
carried out if you are certain
that the unit is isolated from
the power source.
Installation should be carried out
in accordance with the valid
national domestic installation
guidelines, e.g. NIN.
In particular, the directive NIN
4.9.1.ff is valid if the wall display is
to be combined with a low voltage
device with power connection.
Combinations with low voltage
devices are only permitted if
these devices also have a simple
basic insulation.