Revox Re:source M217, Instruction

Page: 10 / 38

M217
Re:control
2-B
Installation procedure
1)
Screw the mounting fixture
(4) onto the recessed or
surface mounted box.
2)
Strip the insulation off the
installation cable and feed it
through the mounting fixture
(4).
3)
Connect the cable to the
Phoenix screwed terminal
block.
4)
Connect the terminal block
with the print connector on
the back of the operator
panel (1).
5)
Locate the operator panel (1)
with its frame (3) onto the
mounting fixture (4), so that the
clip connectors (2) on the panel
(1) line up with the cut-out (5) in
the mounting fixture (4).
6)
Press the operator panel (1)
onto the mounting fixture (4)
until the clip connectors clip
into place.
You should
avoid applying
any pressure
to the display
during or after
installation.