Operation
Symphony
61
Alarm Clock
1 / 2
The Symphony has two independent
alarm clocks (1/2) that can be set simply
and intuitively.
Using the navigation compass, you can
set the switch-on time, the sound
source, the wake-up volume [max.
volume 40] as well as the days of the
week when the receiver should wake
you up.
The following options are available as
the sound source:
•
Beep (classical)
•
Radio (iRadio, FM Tuner*, DAB+*)
•
Audio server
•
USB
•
iPod
•
My Music (No. 1-18)
With all sources, except the beep, you
must ensure that the source is available
at the preset time. If the Symphony
identifies that it is not possible to play
the desired source, it automatically
selects one that is available. If none of
the audio sources
can be played, the beep is used as the
last option.
The weekday selection is done simply by
using the
buttons and OK. The blue
bar
indicates the currently selected
day. The day can be activated with OK. A
large icon with a blue border indicates a
day when the alarm clock will operate. A
small black & white icon indicates a day
when the alarm clock will remain silent.
In the example shown here, the alarm
clock is active on Tuesday, Wednesday,
Thursday and Friday and is switched off
on the other three days of the week.
You can use the Test option to check the
alarm clock setting in terms of the
volume and the source and correct them
if necessary. Selecting OK ends the test.
Otherwise, the test stops automatically
after 30 seconds.
Deactivating the alarm clock
In the "Switch-on time" line, you can
activate/deactivate the alarm clock
through the OK button.
The two icons
in the status line
towards the bottom of the S208 display
show which alarm clock is currently
active.
The Status LED on the Symphony shows
permanently red
after being switched
off if an alarm clock is active.
* with optional DAB+/FM Tuner module
