Symphony
Configuration
22
First contact
Various connections have to be made
before setting up your Symphony
for the
first time.
Power cable
Only use the power cable supplied by
Revox.
The Symphony has an adaptive power
unit that is designed for mains voltages
between 100 and 240 VAC (50-60 Hz).
Alternatively, the Symphony can also be
operated with a DC power source
(12 - 18 VDC, 3A) as is found, for
example, in caravans, campers or boats.
LAN/WLAN network connection
The Symphony is designed for network-
based functions, such as playing
Internet radio or as a streaming client for
your music library that is located on a
network hard drive. The Symphony
needs access to your network for these
functions. This can be done preferably
through a wired LAN connection, using
the supplied RJ45 network cable or
wirelessly through a WLAN (WLAN
antenna suppied).
The reason for preferring a wired LAN
connection to a WLAN connection is its
reduced susceptibility to failures and the
option of being able to transmit high-
resolution audio formats (
≥
96 kHz)
without any interruptions. If a LAN
connection is used, the WLAN function
is switched off. In this case, the supplied
WLAN antenna is not needed. The
wireless connection to the S208 remote
control is done through the radio (RF)
module integrated in the glass front
panel, which is independent of the
WLAN.