9
EN
The propellers on the Vizo drone are marked near the
center with an “A” or “B.” If a propeller is ever damaged
and needs to be replaced, always replace the propeller
with the same letter type.
1. Remove the screw from the top of the propeller and
remove the propeller by pulling straight up.
2. Using the illustration as a placement guide, replace the
propeller. Make sure to line up the screw hole in the top of
the motor with the corresponding hole in the propeller.
B
A
A
B
Installing the Smart Device Mount
1. Remove the faux antenna by pulling it straight out.
2. Insert the smart device mount into the faux antenna
plug. Use the right-hand screw to adjust the mount
angle.
3. Secure the smart device to the transmitter by tightening
the rear screw.
Using the Vizo View App
The Vizo View app is free software for your 2.4GHz WiFi-
capable smart device allowing you to:
• connect to the Vizo View camera as FPV
• take videos and pictures
• control the Vizo drone using a smart device
1. Install the Vizo View app from Google Play or the App
Store (or use the QR code [right] to download the Vizo
View app).
2. Install a micro memory card into the Vizo.
3. Connect a fully charged Li-Po battery into the Vizo.
NOTICE:
When using a smart device to fly FPV, expect
latiency between the smart device and the drone. Keep
your drone within visual range.
NOTICE:
The transmitter must stay powered off to
completely control your drone via the Vizo View App.
The Vizo View on-screen control sticks are disabled
when connected to your transmitter.
Replacing the Propellers
