13
To use manual tuning
n
Select the
Manual tune
option.
The display shows the current station
number and frequency:
����������������
n
Press
<
or
>
to step between the
stations and press
SELECT
to select the
current station.
If there is a station corresponding to this
station number and frequency the display
will show the station name, and a tuning
meter showing the signal strength:
�����������
��������������
To set the dynamic range control
Revo includes a dynamic range control that
automatically boosts the volume of quieter
sounds for listening in noisy environments.
n
Select the
DRC value
option.
The display shows the current DRC value
and allows you to adjust it:
�����
����������������
The DRC value can be switched between
the following options:
DRC
Description
DRC 0
Dynamic Range Control is
switched off.
DRC
½
Dynamic Range Control is set
to half normal level.
DRC 1
Dynamic Range Control is
switched on; the default
setting recommended for noisy
environments.
To display the software version
number
n
Select the
SW version
option.
The version number is displayed on the top
line of the display. You should specify this
when speaking to Revo Technical Support.
Summary of Contents for Revo In-Car
Page 1: ...ß ...
