10
Switching on and off
To fit Revo into its cradle
n
Slide it down until it clicks into place.
If you wish you can lock Revo into position
on the cradle using the lock switch on the
back of the unit.
When you first fit Revo into its cradle it will
be in standby mode with the display blank
and no sound playing.
Revo will also be in standby mode when the
vehicle’s ignition is switched on.
To switch on from standby
n
Press any key on the front panel or
optional remote control.
To put Revo into standby
n
Press and hold
MUTE
for two seconds.
To mute or restore the sound
n
Press
MUTE
.
The second line of the display will show
Muted:
�����������
�����
To restore the sound press
MUTE
again.
To switch the display backlight on
or off
n
Press the backlight button.
To restore the backlight press the backlight
button again.
To reset Revo
If you want to restore Revo to its standard
settings:
n
Press and hold down
MENU
until the
display shows:
���������������
����������������
n
Press
SELECT
.
Summary of Contents for Revo In-Car
Page 1: ...ß ...
