9
THE OPTIONAL LED WORK LIGHT
Models equipped with the optional LED WORK LIGHT have a light which is always on whenever the
machine is plugged in. This can be useful when working in dark work spaces.
CAUTION: Never attempt to re enter a half-finished cut if the magnet has been turned off and the
machine shifted in the interim. This may destroy the cutter.
MAINTENANCE
1.
Keep the machine clean and free of chips.
2.
Check for loose fittings and tighten as needed.
3.
Ensure that the ventilation slots are clear so that motor can be cooled normally. Blow low-pressure
compressed air through the ventilation slots with the motor running to keep motor clean.
THE ARBOR SHAFT
Keep the arbor shaft free of dirt and lightly grease as needed. If the mechanism is noisy, it may be dirty or
have a chip lodged in it. Clean and re-grease as needed.
LED Work Light
Summary of Contents for Low Profile 35
Page 11: ...11 Wiring ...
