34
35
a
Locate the AC/DC power adaptor.
b Plug the small end of the power cord into the opening
on the side of the REVITIVE.
Step 6:
Recharging the battery
REVITIVE can be powered from either the rechargeable battery or by connecting it to
an electrical socket.
Low Battery
Full Battery
c Plug the power adaptor into the nearest electrical socket. This will start charging
the (integrated) rechargeable battery.
The battery indicator will illuminate constantly to indicate the device is charging
and to show the battery level, as below.
A full charge will take approximately 3 hours.
d
Once fully charged, the full battery indicator will stay illuminated until the power
adaptor is unplugged from the device or the electrical socket.
A full charge enables approximately 3½ hours of use (the equivalent of seven
(daily) 30 minute sessions).
Please note you can still use the device while it is charging but the battery
indicator will not show.
Instructions for use
Step
7:
Cleaning and storing REVITIVE
a
Ensure REVITIVE is switched off.
b
Wipe down the foot-pads with a soft damp cloth.
Do
not
clean
with
chemicals.
Do not immerse REVITIVE in water.
c
Store REVITIVE in a cool, dry and dust-free location.
Store out of direct sunlight.
d
Place Electrode Pads onto the plastic liner.
e
Store the Electrode Pads in a dry and ventilated location.
Store
out
of
direct
sunlight.
You do not have to detach the Electrode Pads from the Electrode cords to
store them.
Replacing the Batteries
The remote control requires two AAA 1.5V batteries to operate.
Replacing the Electrode Pads
The Large Electrode Arthritis Pads and Smaller Electrode Body Pads are reusable
up to 20-30 applications. If the Electrode Pads start to lose their adhesiveness, rub
a few drops of water into the surface. Replacement Pads can be obtained via
www.
revitive.com
EN
EN
4397_IFU02_16220241.indd 34-35
25/01/2019 14:51
