16
1. Gently remove the ember material from the plastic bag(s).
2. Spread small pieces evenly along the length of the bottom log, behind the front burner.
Repeat this procedure for the other front burner.
3. Carefully avoid any clumping or large buildups and do not place on top of burner holes.
4. DO NOT place embers on the main burner.
5. Upon the first light up watch for smooth and fast ignition to all burner ports. If a long
delay is observed then : a) First, wait for the appliance to cool down. b) Open the door(s)
of the appliance. c) Carefully reposition the embers at the point of the delay. d) Check to
ensure that no burner ports are plugged solid.
CAUTION : NEVER OPERATE THIS APPLIANCE WITH THE DOOR(S) OPEN
CARE OF YOUR GLASS DOOR ASSEMBLY
It will be necessary to clean the glass periodically.
During a cold start up condensation will sometimes form on the glass.
This is a normal condition with all gas fireplaces and stoves.
However, sometimes this condensation can allow dust and lint to cling to the glass surface.
Also, sometimes the initial paint curing of the appliance can leave behind a slight film on the
glass. This is only a temporary problem.
It is therefore recommended that the glass be cleaned initially after about two weeks of use.
After that, depending upon the amount of use, cleaning should be required no more than two
or three times per season. To clean the door, use a mild cleaner (i.e. Windex, Fantastic) and a
soft cloth. Abrasive cleaners will damage the protective coating.
ROUTINE MAINTENANCE WARNING:
Improper installation, adjustment, alteration, servicing or maintenance can result in personal
