H
O
W
T
O
U
S
E
D
I
S
P
E
N
S
E
R
10
By pressing button for more than 2 seconds, display is switched into screen
change mode
Initial mode is AUTO/MANUAL mode
If you want to change set value in mode screen, then push button, then value is
blinking
and if you push button, value is set, make sure to confirm changed value by
pressing button again. After all changes are completed, make sure to push
button for more than 2 seconds to save changed values. Otherwise or if power is
turned off without saving set values, then the changes are not reflected.
AUTO
■
How to set mode
AUTO
Manual
Auto Mode
When a cup is recognized, then beer is discharged in 0.5 second according to
set values: Large / Medium / Small.
Manual mode
Although a cup is recognized, beer is not discharged without pushing ‘START’ button.
By pressing ‘STOP’ button,
If you select Auto / Manual mode by pushing left or right button, then
currently set mode
is displayed. By pushing button, current status is blinking along with beep sound and
then system is ready to change mode. By pushing button, mode is switched into
Auto<->Manual mode and then setting is completed along with beep sound by pushing
button. Make sure to save set value by pushing button long. Even though
power is turned off, set value is not changed nor return to original status.
■
Auto / Manual Mode
