Reverie 3E Power Base Owner'S Manual And Reference Manual Download Page 5

CUSTOMER SERVICE: 800-973-8374

[email protected]

5

Safety Precautions

This product is for use on a standard 120-volt circuit, and has a grounding plug that looks 

like the plug illustrated in photo A (see Figure). A temporary adapter that looks like the 

adapter illustrated in photo B and C can be used to connect this plug to a 2-pole receptacle 

as shown in photo B if a properly grounded outlet is not available. The temporary adapter 

should be used only until a properly grounded outlet (photo A) can be installed by a 

qualified electrician. The green colored rigid ear, lug or the like extending from the adapter 

must be connected to a permanent ground such as a properly grounded outlet box cover. 

Whenever the adapter is used, it must be held in place by a metal screw.

This product is for use on a circuit having a standard rating of 120 volts and is factory equipped 

with a specific electric cord and plug to permit connection to a proper electric circuit. Make sure 

that the product is connected to an outlet having the same configuration as the plug. No adapter 

should be used with this product. If the product must be reconnected for use on a different type of 

electric circuit, the reconnection should be made by qualified service personnel.

Unauthorized modifications could void the electrical portion of your warranty.

 Failure to use a 

properly grounded outlet for this product or modification of the plug will compromise this important 

grounding safety feature and may result in electrical shock, electrical fire, or faulty operation of the 

product.

FOR BEST RESULTS, YOUR POWER BASE SHOULD BE PLUGGED INTO A SURGE 

PROTECTOR (not included).

WARRANTY PRECAUTION: 

Do not open control box, motors or wireless remote controls (with the exception of the battery 

compartment if equipped). The warranty is void if these units are tampered with. Any repair or 

replacement of power base parts must be performed by an authorized technician.

IN-HOME USE AND HOSPITAL DISCLAIMER:

Your power base is strictly designed for in-home use only. It is NOT designed for hospital use 

and is NOT designed to meet hospital standards. Do not use this base with TENT TYPE oxygen  

therapy equipment or near explosive gases.

Summary of Contents for 3E Power Base





























Reviews: