- 38 -
3.6. Review of other functions
3.6.1. Headlights reminder
At the stage of assembly, decide what signal would you like to connect at pin A21 – a signal from headlights or fan cooler. If you choose headlight
reminder function, you should connect appropriate signal from headlights relay (+12V headlights on, 0V headlights off).
If vehicle speed is greater than 10 [km/h or mph] and headlights will not be turned on, the screen will show a message “Turn headlights on” and you
will be additionally informed with sound signal (from buzzer).
The screen will disappear only when you turn on headlights or you press any button (this way reminder is deactivated until next ignition switch).
3.6.2. Inspection / Service
There is a possibility to set inspection/service reminder – how many kilometers (or miles) left to service (eg. oil change) or how many hours left to
service. Up to 4 different inspections can be set for distance, up to 2 inspections for moto-hours and up to 2 inspections for date. Mileage and
inspection function should be set in UTCOMP application. If it is less than 1500 km/mil (or 10 hours or 15 days) than reminder screen appears (for 5
seconds) with information how many km/mil (or hours) left to inspection. If inspection label is set it will be also displayed.
You can reset inspection in user settings mode (long press SW1) or directly from UTCOMP application. You can preview next inspection by pressing
any button during splash screen.