- 27 -
You can end calibration process at any time. Run UTCOMP application, click "Help" button and go to "Calibration Assistant" tab. You can import
collected data from UTCOMP or rewrite it manually (they are displayed in DIAGNOSTICS screen). First step is to calculate VSS constant which is
responsible for speed and distance readings. Type real distance travelled by the vehicle (displayed on odometer or GPS) and click "Calculate". In order
to calculate injection constant (which is
responsible for fuel consumption readings)
type average fuel consumption on the same
distance (you can use information from
vehicle's user manual at this moment) and
click "Calculate". Enter and save calculated
constants
in
UTCOMP
configuration
(Settings -> Configuration -> Vehicle
Data).
Congratulations! You have just finished
initial calibration - was not so hard, was it?
If you would like to achieve better accuracy
of readings, we recommend to do accurate
calibration described in next Chapter.