Pull-out the antenna on the remote control all the way to improve signal reception.
Place the ON/OFF switch of the car in the “ON” position (Fig. 1). Put the car on the floor facing
forward. The car is now ready to operate.
Driving the vehicle
1. geTTINg STArTeD:
Attention:
The jumping-off point on the ramp determines the flight characteristics of the car.
The optimum jumping-off point varies depending on the type of ramp that is used.
Self-made arched ramps can be used
to demonstrate other special effects of
the car.
TIP:
2. OPerATION:
3. JuMPINg Over The rAMP AND PerFOrMINg FLIPS:
The package includes a ramp. Put it together and secure it on the floor with tape.
The speed of the car before the jump is the most important factor influencing the quality, height, and length of the jump.
That’s why don’t forget: full throttle!
Release the forward-button.
After the car hits the floor
accelerate to continue its
forward motion.
Proper accelerating the car will allow it jump nicely over the ramp.
The car flies forward.
The car falls to the floor if the forward-
button is released.
Fig. 1
Fig. 2
Drive the car forward and press the turbo-button at the
jump-off point: the car jumps over the ramp.
1.
The signal indicator lights-up as soon
as a button on the remote control is
actuated.
4.
The car moves forward and backward in
a right/left curve if the right/left-button
on the remote control is pressed while
the car is moving.
2.
The car moves forward if the
forward-button is pressed. The car
moves backward if the backward-
button is pressed.
3.
The car moves
forward at the
maximum speed
if the turbo-button
is pressed.
5.
The directional stability of
the car can be corrected
with the wheel alignment
setting.
Press forward-button
release forward-button
Accelerate
english
7
