background image

Steering

Throttle

Steering Trim

Power Switch

2

Vehicle and Transmitter Parts

1.

  Slide the battery cover from the bottom of the 

transmitter.

2.

  Insert (3) 1.5V AA batteries, following the polarity 

information. 

3.

 Re-install the battery cover.

Insert Batteries into the Transmitter

ESC Switch

Motor

LiPo Battery

LiPo Battery

Connector

Summary of Contents for modzilla mt

Page 1: ...a battery if it is swollen or hot Do not place the charger or any battery on a flammable surface or near combustible materials while in use Never disassemble or modify pack wiring in any way or puncture cells Never charge inside a vehicle Always disconnect the battery and remove the charger from the USB port when not in use ALWAYS keep a supply of sand accessible when charging Dumping sand on the ...

Page 2: ...ansmitter Parts 1 Slide the battery cover from the bottom of the transmitter 2 Insert 3 1 5V AA batteries following the polarity information 3 Re install the battery cover Insert Batteries into the Transmitter ESC Switch Motor LiPo Battery LiPo Battery Connector ...

Page 3: ... in the battery 3 Disconnect the battery from the charger and reconnect the battery to the speed control 2 The charging process takes approximately 3 5 hours For safety reasons never charge the battery for longer than 4 hours While charging the red charger LED will be on When the battery is finished the green charger LED will be on 1 Switch off the car 2 Carefully plug the charger into the USB por...

Page 4: ...tery Problem Transmitter LED flashing slowly low voltage Solution Replace the transmitter batteries REVELL INC 1850 HOWARD ST UNIT A ELK GROVE VILLAGE IL 60007 U S A MADE IN SHANGHAI CHINA PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE CONTENTS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2015 REVELL INC A SUBSIDIARY OF HOBBICO INC Steering Trim Driving Tips Driving the Vehicle continued Run ...

Reviews: