REVELL modzilla mt Instruction Manual Download Page 4

4

revell.com

Linking Procedure

The Modzilla is equipped with an auto linking feature which allows the transmitter and receiver to automatically link once they are 
turned on. Make sure to turn the transmitter on before the vehicle.

Troubleshooting

Service

If your Modzilla

 requires repairs or replacement, 

DO 

NOT RETURN TO RETAILER.

 Contact:

Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, Il, 61822, U.S.A.
9am-5pm Central Mon.-Fri.
(217) 398-0007
[email protected]

Problem:

 The wheels won’t turn.

Solution:

 Recharge the battery.

Problem:

 The transmitter doesn’t function.

Solution:

  Make sure the batteries are inserted correctly.

Insert new batteries.

Problem:

 The vehicle loses speed or comes to a stop.

Solution:

 Recharge the battery.

Problem:

 Transmitter LED fl ashing slowly (low voltage). 

Solution:

 Replace the transmitter batteries.

REVELL, INC. 1850 HOWARD ST., UNIT A, ELK GROVE VILLAGE, IL 60007 U.S.A.
MADE IN SHANGHAI, CHINA
PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE. CONTENTS AND 
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

© 2015 REVELL INC.  A SUBSIDIARY OF HOBBICO, INC.

Steering Trim:

Driving Tips:

Driving the Vehicle (continued)

 

  Run the vehicle on a fl at surface.

  Watch the vehicle instead of looking at the transmitter.

•  Always release the throttle trigger right away following a crash to prevent 

damaging the electronics.

  The vehicle should be operated in an area that has as much open space as 

possible with no people or animals nearby.

  Do not operate this vehicle on the street.

  If the vehicle pulls right (when viewed from 

behind), rotate the knob to the left.

  If the vehicle pulls left (when viewed from 

behind), rotate the knob to the right.

Steering Trim Button

Summary of Contents for modzilla mt

Page 1: ...a battery if it is swollen or hot Do not place the charger or any battery on a flammable surface or near combustible materials while in use Never disassemble or modify pack wiring in any way or puncture cells Never charge inside a vehicle Always disconnect the battery and remove the charger from the USB port when not in use ALWAYS keep a supply of sand accessible when charging Dumping sand on the ...

Page 2: ...ansmitter Parts 1 Slide the battery cover from the bottom of the transmitter 2 Insert 3 1 5V AA batteries following the polarity information 3 Re install the battery cover Insert Batteries into the Transmitter ESC Switch Motor LiPo Battery LiPo Battery Connector ...

Page 3: ... in the battery 3 Disconnect the battery from the charger and reconnect the battery to the speed control 2 The charging process takes approximately 3 5 hours For safety reasons never charge the battery for longer than 4 hours While charging the red charger LED will be on When the battery is finished the green charger LED will be on 1 Switch off the car 2 Carefully plug the charger into the USB por...

Page 4: ...tery Problem Transmitter LED flashing slowly low voltage Solution Replace the transmitter batteries REVELL INC 1850 HOWARD ST UNIT A ELK GROVE VILLAGE IL 60007 U S A MADE IN SHANGHAI CHINA PLEASE RETAIN PACKAGING FOR FUTURE REFERENCE CONTENTS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2015 REVELL INC A SUBSIDIARY OF HOBBICO INC Steering Trim Driving Tips Driving the Vehicle continued Run ...

Reviews: