5
Mirroring Sub Menu
This function will only be used by a few people in rare circumstances, 99% of our customers
can ignore it.
If for example you have a camera you wish to cancel mirror image on to use as a camera
looking to the side as an emerging from junction camera you can use this menu to do so.
1.
Exit the menu system and select the camera you wish to modify using CAM button.
2.
Enter the main menu, arrow down to mirroring and press menu to enter.
3.
Select the channel number of the camera you wish to modify.
4.
As default the option is set to off, change this to the option you require. The
options are : OFF, V = Vertical flip will turn the picture upside down, HV = Horizontal
and Vertical flip will turn the picture upside down and mirror that image with the
horizontal rotation, H = Horizontal flip this will mirror the image.
5.
In our example we would have changed our camera to H, as this will mirror the
picture (almost all of our cameras are mirror imaged as standard so mirroring this
mirror image will turn it back in to a normal view image.
Video Sub Menu
As standard we recommend that you use Auto, which will auto detect the video type of the
camera. The options are PAL/NTSC/AUTO. Selecting the wrong type would mean you get a
black and white picture or no picture.
Option Sub Menu
Allows you to select picture mode and aspect ratio (16:9/4:3), this is usually left alone and
picture mode can be changed when not in menu by pressing the mode button.
Imperial Function
Pressing this will allow you to use either M for metres or F for feet. This only really applies
if you are using guidelines on the monitor.
Park Setup (Guidelines)
The monitor can add guidelines to the picture when the trigger wire has power (ie when
reverse is selected). If we wish to have guidelines then before continuing ensure your
camera is plugged in to Channel 2 (Black input) and the green trigger wire is connected to
the reverse light feed. The monitor should now trigger on and off everytime you go in to
and out of reverse.
Enter this menu and set
LINE 2
to
ON
.
Now enter
Line 2 Setup
.
