Revbox MK7.0, Instruction Manual

Page: 5 / 22

4. Mount a suitable cassette
to the freehub body.
5. Fit the long quick release
skewer to the trainer through
the cassette/freehub axle.
Mounting your bike to
the Revbox unit :
1. Remove the rear wheel from your bike
and fit it to the trainer.
2. Ensure that the drop outs rest on the
long quick release axle, then make
sure the quick release is done up
tight. (This is done easiest with the
gears set in the smallest sprockets).
If you require any fur ther assistance with
your set up, do not hesiate to contact us