MAINTENANCE
ADJUSTING THE SEALING OF THE DOOR
The seal between the tub and the door is provided by a silicone seal. When you close the door, the seal compresses and
therefore ensures sealing.
Over time and following the many manipulations of the lock and / or deformation of the composite material of the door,
the seal between the tub and the door can be reduced. In this case, an adjustment of the lock is necessary in order to
increase the compression of the seal.
PROCEDURE FOR INCREASING COMPRESSION OF THE SEAL:
1 °) Have a 5mm Allen key.
2 °) Insert the Allen key into the adjusting screw located inside the door lock.
3 °) Turn the Allen key a quarter of a turn in a clockwise direction.
4 °) Remove the Allen key.
5 °) Close the door and operate the lock.
6 °) Visually check the compression of the seal over its entire length.
7 °) Fill the tank with water to test the tightness.
Repeat if necessary.
19/21
Tightening the set screw will make the door handle harder to operate.
In case the seal could not be adjusted AND / OR the door handle would be too much hard to
operate, it is necessary to adjust the door at the level of the bearings.
For this, contact our After-Sales Service.
