DIRECTIONS FOR USE
WATER TEMPERATURE ADJUSTMENT (VERSION 7202)
To adjust the water temperature, turn the button of the mixer.
During use, If you need a water temperature upper to 40°C, push the red index and turn the
button counter clockwise.
A digital display allows to check tha water temperature.
FILLING
The filling cavity of the Transcare tub requires less then 90 litres of water to be filled to its maximum level.
When the tub is placed in recline position, this amount of water is sufficient to fully immerse the client.
Fill only to the maximum water level indicator. The overflow drains are designed to prevent an accidental overflow.
Check the water temperature. If necessary , adjust it thanks to the mixer.
Close the drain plug by turning the button in a clockwise direction.
Turn on the filling tap
WATER ADDITION
It is possible to add water into the bath when it is tilted.
However, before levelling the bath to its upright position, the water level must be decreased
by opening the drain plug to avoid water overflow and splashing.
CLEANING SHOWER
The shower head can be operated at any time. Remove the shower hand from its holder.
Turn the shower control tap
counter clockwise to start and adjust the flow intensity.
Select the desired temperature by adjusting the temperature valve as described above.
The shower head spray can be adjusted from a wide to narrow flow.
10/21
