Control System Startup Guide
Copyright 2019 REV Robotics, LLC
2
2
Driver Station and Control Hub Paring
When you first receive your kit, you will have to pair (link) your Driver Station (Amazon Fire Table) to your Control Hub.
This procedure only needs to be performed once for each set of hardware. If you exchange (replace) your tablet or
Control Hub, this procedure will need to be repeated. See Section 2, ELECTRICAL COMPONENTS, of the
, on
the FIRST Global website for more information.
Pairing the Driver Staion with the Control Hub
1.
Power on the Control Hub, by plugging the
12V Slim Battery into the orange XT30
connector
labeled “BATTERY” on the
Control Hub.
2.
The Control Hub is ready to pair with the
Kindle Fire when the LED turns green.
Note: the light blinks blue every ~5
seconds to indicate that the control hub is
healthy.
3.
Power on the Kindle Fire by holding down
the top right button.
