10
EQUIPMENT/FUNCTION
This radio switch set consists of a remote control and three radio-controlled sockets. With this product you can
switch any electrical and electronic devices (e.g. lamps, TV, computer, Christmas lights,...) up to 3680W power
over a range of up to 30m (free field). You can switch your devices on and off from any location, even through
furniture and walls. The range in buildings depends on the structural conditions.
The correspondingly taught-in radio-controlled socket is switched on and off via the ON - OFF buttons on the
respective channel -1-,-2-,-3-.
The ON -OFF buttons on the -ALL- channel are used to switch all connected radio-controlled sockets ON or OFF
simultaneously.
Remote control (A1):
A CR2032 battery is required for the remote control. This is already in the unit at the time of purchase. Remove the
battery strip before first use. Please be sure to observe the position marked in the battery compartment! There is a
risk of explosion if the battery is replaced with the wrong type.
Caution: Replace the battery when the range of the remote control decreases considerably. Remove the battery
from the unit if you are not going to use it for a long time. We recommend replacing the battery once a year. Please
dispose of used batteries in an environmentally friendly way by returning them free of charge to the retailer.
Commissioning (A2) and use:
Plug the radio-controlled socket into the socket provided. Press the ON/OFF button on the radio-controlled socket
for >5 seconds. As soon as the LED in the button on the radio-controlled socket flashes, press the ON button
of the channel to be assigned on the remote control. The radio-controlled socket is then paired with the remote
control. Repeat the procedure for the other radio-controlled sockets. If you assign the same channel to several
radio-controlled sockets on the remote control, they will be switched simultaneously.
Attention: The connection cable of the individual radio-controlled sockets of max. 3680W must not be exceeded.
No reaction at the device to be switched:
- Is the load (device to be switched) switched on?
- Is the radio-controlled socket within range? Test by approaching.
- Does the device to be switched (type and power) match the receiver?
Unintentional switching on/off of the consumer:
- Is another transmitter, such as wireless headphones, radio gong, etc. nearby?
Change location.
Range too low:
- If several radio-controlled sockets are used, are they at a sufficient distance from each other?
(approx. 1.5 to 2m)?
- Direct connection (free field) between remote control and radio-controlled socket results in optimum range.
- Is the radio link interrupted by as few obstacles as possible (walls, furniture, etc.)?
- Other transmitters in the vicinity reduce the radio range. Only one system may transmit at a time!
- Structural conditions have a considerable influence on the range. Slight changes of location can
have a considerable influence on the range of the radio link.
- Battery used up? Replace if necessary.
GB
ERROR SEARCH
• De-energised only when the plug is pulled out
(S5)
!
• Do not operate the product’s buttons with electrically conductive objects!
• Do not plug one behind the other
(S6)
!
• Do not operate the product at, on or in the vicinity of open flames (e.g. candles)!
• Do not expose the product to direct sun and shield it from extreme heat!
• Do not operate any devices whose unattended operation could endanger life and property!
• Plugged-in power supply units must not exceed a temperature of 50°C.
• Only connect devices up to max.
3680
W total power!
• The product’s keys must not be in permanent operation!
