Rev-A-Shelf 5PSP, Installation Instructions Manual

Page: 5 / 8

5
Mount Base (Fig. B) .
Note: If installing into a face
frame cabinet, base must be
flush with the opening.
STEP 1
Use (19) of the 4G x 18 mm
pan head wood screws to
secure the base to the bottom
of the cabinet (See Fig C-1) .
Note: Pre-drilling the screws
is recommended.
Install the guide channel on the
base of the unit by securing
it with (2) of the M5 x 6 mm
flat head screws. If the guide
channel is installed incorrectly,
the unit will not open correctly.
(See Fig C-2) .
STEP 2
Fig. A
Fig. C-1 Fig. C-2
CHOOSING THE DESIRED BOTTOM
SHELF FOR THE UNIT
Unscrew the M4 x 4.5 mm Pan
Head Screws from the bottom
of the shelf. Choose the
desired color by flipping the
shelf. Install the bottom shelf
back by screwing the M4 x 4.5
mm Pan Head Screws back
into the unit (See Figure A).
BLIND
Fig. B
From door opening
Guide Channel
305 mm
160 mm
256 mm
To front of cabinet
5PSP-15 (RIGHT HANDED DOOR OPENING)
Door Drawer Blind Right Door Drawer Blind Right
Full Height Blind Right Full Height Blind Right
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Door Drawer Blind Left Door Drawer Blind Left
Full Height Blind Left Full Height Blind Left
Blind Portion
of Cabinet
Door Opening
Door Opening
Door Opening
Door Opening
Shown with adjacent cabinet
Shown with adjacent cabinet
Blind Portion
of Cabinet
Door Opening
Blind Portion
of Cabinet
5
4