Returnstar Interactive Technology Group Co., Ltd.
10
Step 3. Drill 6 holes(70mm in depth) by a 6mm electric drill on the positions of the 6
screws you determined as per above. (2 holes for each of bottom bracket; 1 hole for
each of upper bracket)
Step 4. Put a Wall Anchor into each hole, and screw the brackets with M4*70 flat
cross-tapping screw.
Step 5. Put IQBoard on the fixed 4 L-type Brackets, and let it centered horizontally.
Fasten the upside screws and lock the downside screws.
3.3 Stand Mounting
Parts list
Picture
Name
Quantity
Leg Bar
2
Column
2
Supporting Bar
2
Caster
4
Moveable Crossbeam
(each includes 2 Beams and a
U-
shaped Groove; for 100″, 112″
and 120″ whiteboards, Beams and
U-shaped Grooves are especially
lengthened)
2
Hexagon Bolt A
2
