Retsch ZM 300, Manual

Page: 36 / 93

Operating the device
36
6.6 Inserting the grinding tools und cassette
NOTICE
N9.0000
Damage to the device
Incorrect insertion of the grinding tools and the cassette
−
If the grinding tools and the cassette are not inserted correctly into the
interior of the device, the device will be damaged.
•
Insert the grinding tools and cassette as described in this manual.
•
Do not start the device without the ring sieve in place.
Before grinding of sample material, the required grinding tools and the cassette must be inserted
into the interior of the device.
No special tools are required to insert the grinding tools into the interior.
Insert the grinding tools and the cassette into the interior as follows:
Fig. 18: Main switch at rear of device
1. Switch on the device.
➔
The touch display (6) is activated and the
background of the control dial (7) briefly
lights up in blue.
2. Press on the touch display (6) to unlock
the device hood (2) ( Fig. 18).
3. Open the device hood (2).
➔
The device hood (2) is open and the
interior (10) can be accessed ( Fig. 18 ).
16
6/7