Retsch PT 300 Manual Download Page 9

Page: 9 / 42

Safety

NOTICE

N1.0000

Type of damage to property

Source of the damage to property

−

Possible consequences if the information is ignored.

•

Instructions and information on how to avoid the damage to
property.

Damage to property

may result if the information is disregarded. The signal word

NOTICE

additionally used in the running text or in instructions.

2.2 General Safety Instructions

CAUTION

C2.0002

Risk of injury

Lack of knowledge of the manual

−

The manual contains all safety-related information. Disregarding the

manual can therefore lead to injuries.

•

Read the manual carefully before operating the device.

CAUTION

C3.0015

Risk of injury

Improper modifications to the device

−

Improper modifications to the device can result in injuries.

•

Do not make any unauthorised changes to the device.

•

Only use the spare parts and accessories approved by Retsch
GmbH!

NOTICE

N2.0012

Changes to the device

Improper modifications

−

The conformity declared by Retsch GmbH with the European Directives

will lose its validity.

−

Any warranty claims will be terminated.

•

Do not make any modification to the device.

•

Use spare parts and accessories that have been approved by Retsch
GmbH exclusively.

Summary of Contents for PT 300











































Search results

Summary of Contents for PT 300

Reviews:

Related manuals for PT 300

Brands by name

Popular brands

Retsch PT 300, Manual

Search results

Summary of Contents for PT 300

Reviews:

Related manuals for PT 300

Brands by name

Popular brands