Retsch PT 300, Manual

Page: 34 / 42

Operating the device
34
Fig. 24 : Display after starting the division process
Confirm the safety query by pressing F1 if the hopper (funnel) has been closed. The division
process will then start.
Confirm the safety query by pressing F4 if the hopper has not been closed. The division
process will then not be started, and you will return to the start menu .
The display shows the following view after the safety query has been started by pressing F1
(soll das vielleicht “after the division process has been started” heißen?).
Fig. 25 : Display during the division process
The display shows information about the current division process:
Speed Speed (in rpm) Provides information about the set speed of the divider
module.
Feeder Vibration intensity (in
%) Provides information about the set vibration intensity of
the vibratory feeder.