background image

Technical data

 

 

14

 

4.3  Emissions  

Pos :  5. 10 /00010  Bedi enungsa nleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0208  PB Modul  Lärmmess ung @  2\ mod_1262868735111_9. doc  @  18385 @    

 

The noise is measured with two different samples at the three speeds: 

 

Noise level with 250ml water:  

slow speed: 49.6 db (A) 

normal speed: 53.2 db (A) 

high speed: 55.3 db (A) 

 

Noise level with 225ml water + 25g Babybel (processed cheese): 

slow speed:   51.4 db (A) 

normal speed:  

52.4 db (A) 

high speed:  55.2 db (A) 

Pos :  5. 11 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Sc hutz art  @  0\ mod_1226491839164_9.doc  @  3328 @    

 

 

4.4  Degree of protection 

Pos :  5. 12 /00010  Bedi enungsanleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0209  PB Modul  Sc hutz art @  2\ mod_1262870442240_9. doc  @  18392  @   

 

– 

IP40 total device  

– 

IP54 interior  

Pos :  5. 13 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Nennleist ung @  0\ mod_1226491873164_9. doc  @  3334  @   

 

 

4.5  Rated power 

Pos :  5. 14 /00010  Bedi enungsanleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0205  PB Modul  Ne nnl eist ung @  2\ mod_1262860862995_9.doc  @  18364 @    

 

Power consumption: max. 100 W  

Pos :  5. 15 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Nennspannungen @  1 \mod_1240476024494_9. doc @  8571 @  2 

 

4.6  Rated voltage  

Pos :  5. 16 /00010  Bedi enungsanleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0206  PB Modul  Nennspannung en @  2\ mod_1262860929402_9. doc  @  18371 @    

 

115 V  +/- 10 %, 50-60 Hz  

230 V  +/- 10 %, 50-60 Hz 

Pos :  5. 17 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Abmessungen  und G ewicht @  0 \ mod_1226492212173_9. doc @  3352 @   

 

 

4.7  Dimensions and weight 

Pos :  5. 18 /00010  Bedi enungsanleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0204  PB Modul  Ab mes sungen  und  Gewic ht  @  2\ mod_1262860636573_9. doc @  18357  @   

 

Height: 400 mm (without lid) 

Width: 330 mm  

Depth: 380 mm  

Weight: approx. 20.3 kg  

Pos :  5. 19 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Erf orderliche  St andfl äc he @  0\ mod_1226492678414_9. doc  @  3364  @   

 

4.8  Required floor space 

Pos :  5. 20 /00010  Bedi enungsanleit ung en/00140  Kapit elsamml ung  Paddle Bl ender/0002 PB  Kapit el Technisc he Daten/ 0207  PB Modul  Er f orderliche  St andfl äche  und Mindes tabs tand @  2\ mod_1262868173258_9. doc @  18378  @   

 

400 mm x 600 mm; no safety spacing required  

Pos :  5. 21 /00010  Bedi enungsanleit ung en/------- Seitenumbr uch ----------- @ 0\ mod_1222344373758_0. doc  @  2386  @   

 

Summary of Contents for PB100
































Reviews: