Controlling the Device
30
7
Controlling the Device
7.1 Operating Controls, Displays and Functions
Fig. 11:
Operating controls and functions
Element Description
Function
H1
STOP
Stops the sieving process. In standby or setting mode,
the red LED is lit
H2
START
Starts the sieving process. During operation, the
green LED is lit
H3
Time setting
Reduces or extends the sieving time by pressing the
"-" or "+" button, respectively in the range of 1 to 99
minutes
H4.1
Interval on
Switches the device into interval operation. During the
interval operation, the green LED is lit
H4.2
Interval off
Switches the device into continuous operation. During
the continuous operation, the green LED is lit
H5
Interval setting
Reduces or extends the sieving time between the
interval pauses by pressing the "-" or "+" button,
respectively in the range of 1 to 10 minutes
H6
Speed setting
Decreases or increases the speed by pressing the "-"
or "+" button, respectively in the range of 50 to
300 rpm or 1 to 1.51 g
H7
Programme setting
Allows for the saving, editing and selection of up to 9
programmes
7.1.1 Start Process
To start the sieving process in the
, press the
button (
H2
).
If the device is in
, press the
button (
H2
)
twice
to start the sieving
process.
The green LED lights up and the sieving process is started. If a process time has been set
beforehand, the time in the display "time" (
H3
) starts to count down on pressing the
button.
7.1.2 Stop Process
The sieving process will stop automatically after the set process time has elapsed. However, the
sieving process can be stopped manually at any time.
H4.1
H6
H3
H5
H7
H1
H2
H4.2
