manualshive.com logo in svg

Retroaktiv MPG-50, User Manual, Page: 23 / 30

Share
Download
Retroaktiv MPG-50 User Manual Download Page 23

RETROAKTIV MPG-50 USER MANUAL

23

TH E PATCH GENERATOR

TH E PATCH GENERATOR

The Patch Generator tool is a powerful feature that creates intelligently randomized tones, as well as preset 
“Init tones”.  (Scratch Tones”)  This tool provides an endless supply of new, musical tones, which can be created 
on any layer of an MPG-50 SETUP.    Here’s how it all works:

The Patch Generator uses categories so users can tell it which type of sound to create.  Below is a chart 
showing the various categories and subcategories, as well as a brief description of the types of sounds each 
will generate.  Note that these category and subcategory names are being used as “musical adjectives” to 
describe characteristics of a sound.   For example, the harpsichord category in the patch generator doesn’t 
create hyper-realistic harpsichord sounds, it creates synth sounds that have the same characteristics as a 
harpsichord.  This common reference we all have allows us to easily categorize the types of sounds we want 
the patch generator to create. 

The Patch Generator Menu

GEN ERATING A TON E

GEN ERATING A TON E

To generate a tone, select a category/sub-category, then select which synth layers the tone will be generated 
on. 

Each section of the synth has its own ENABLE in the patch generator menu.  Sections shown in the menu 
correspond to the sections labeled on the front panel.  (DCO, Pitch Mod, VCF, Filter Mod, VCA, Amp Mod, LFO, 
Envelope Times, Envelope Levels, and Chorus)  Setting a section’s ENABLE to OFF prevents the patch generator 

Setting a section’s ENABLE to OFF prevents the patch generator 

from randomizing any of the parameters in that section when a new tone is created.

from randomizing any of the parameters in that section when a new tone is created.  To disable all sections, 
press PATCHGEN button.  Pressing the PATCHGEN button again enables all sections.   This shortcut makes it 
simple to do something such as disable all sections, then set just one section to ON.  

The tone generator does not randomize any patch settings (KEY SHIFT, KEY MODE, ASSIGN MODE, BEND etc), 
volume and balance settings (UP/LO BAL, VOL & X-FADE), aftertouch settings, or the VCA ENV AMT.   These 
settings can be set manually.  

To generate a patch generator tone from any menu, press SHIFT+PATCHGEN.   The currently selected category 
and sub-category of tone will be generated when this operation is executed.  

PATCH GEN ERATOR CATEGORIES

PATCH GEN ERATOR CATEGORIES

Random - Random

Random - Random- This generates completely randomized tones without any intelligent guidance.

Bass - Synth basses

Bass - Synth basses
• •  All

All - This sub-category generates a wide assortment of bass tones.  Most do not have VCA ENV Release.

• •  No Release

No Release - Basses with no VCA ENV Release 

Summary of Contents for MPG-50































Reviews:

No comments