Export a bank to MKS-50:
Export a bank to MKS-50: To export a bank to an MKS-50, MPG-50 OUT needs to be connected to MKS MIDI IN.
Navigate to Fn: Send MKS-50 Bank
Fn: Send MKS-50 Bank in the MIDI: SYSEX menu.
• • Bank
Bank - This is the MPG-50 bank to be exported to the Juno.
• • Unit
Unit - This is the Alpha Juno unit that the bank will be exported to.
• • MKS-50 bank select:
MKS-50 bank select: - Select bank A or B as the destination
To export MKS-50 bank from MPG-50:
• • Select the unit & destination
Select the unit & destination - Select which MKS unit to export to, and select the destination bank A or B.
• • Step 1/3: Receive PATCH A or B
Step 1/3: Receive PATCH A or B - You will receive the prompt “On MKS-50: Press DATA TRANSFER. Select
‘Bulk*Load [P-A]’ and press WRITE.” Press ENTER on MPG and the MKS-50 will receive the PATCH data.
• • Step 2/3: Receive Tone A
Step 2/3: Receive Tone A- You will receive the prompt “On MKS-50: Press DATA TRANSFER. Select ‘Bulk*Load
[T-a]’ and press WRITE.” Press ENTER on MPG and the MKS-50 will receive the TONE A data.
• • Step 3/3: Receive Tone A
Step 3/3: Receive Tone A- You will receive the prompt “On MKS-50: Press DATA TRANSFER. Select ‘Bulk*Load
[T-b]’ and press WRITE.” Press ENTER on MPG and the MKS-50 will receive the PATCH data.
The MPG-50 bank will now be stored in the MKS-50 memory in standard MKS-50 format.
RECEIVE AN M KS-50 OR ALPHA JUNO PATCH
RECEIVE AN M KS-50 OR ALPHA JUNO PATCH
To receive an MKS or Juno patch, simply navigate to Fn: Receive MKS-50 Patch
Fn: Receive MKS-50 Patch or Fn: Receive Juno Patch,
Fn: Receive Juno Patch,
press ENTER on MPG, then do a program change on the MKS/Juno. The patch will be received by MPG-50 and
will now be in the MPG-50 edit buffer. You will need to store the PATCH in MPG-50 memory using the normal
STORE procedure.
SEN D AN M KS-50 OR ALPHA JUNO PATCH
SEN D AN M KS-50 OR ALPHA JUNO PATCH
To send an MKS or Juno patch, simply navigate to Fn: Send MKS-50 Patch
Fn: Send MKS-50 Patch or Fn: Send Juno Patch,
Fn: Send Juno Patch, and press
ENTER on the MPG. The patch will be sent to the synth, but will not be stored in the synth’s memory. That
must be done by the user.
RETROAKTIV OBJ ECT SEN D & RECEIVE
RETROAKTIV OBJ ECT SEN D & RECEIVE
The following object types can be sent in Retroaktiv format, for either sharing with other MPG-50 users, or
backing up your data. Retroaktiv format objects can be imported or exported by any MPG-50 mki or mkii.
• • Any Retroaktiv bank of Patch, Setup, Assign or User CC
Any Retroaktiv bank of Patch, Setup, Assign or User CC
• • Any individual Patch, Setup, Assign, or User CC
Any individual Patch, Setup, Assign, or User CC
To EXPORT: Select the object type to be exported, and when your DAW/PC is ready to receive the data, press
ENTER on MPG-50. The data will be exported from MPG-50 to the destination device.
To IMPORT: Select the type of Retroaktiv object to be imported, press ENTER on MPG-50 so the unit is ready to
receive the incoming data. Send the data from your device to the MPG. You will receive a ‘Success’ message
when complete.
EXPORT A BAN K TO M KS-50
EXPORT A BAN K TO M KS-50