![background image](http://html.mh-extra.com/html/retro-aire/r40c/r40c_installation-operation-and-maintenance-manual_1445901012.webp)
Installation Instructions — R40C
Installation
Verify the existing wall thickness
1.
— The distance from the
condenser coil to the outdoor louver varies with sleeve depth,
unit(
s
) ship standard with 2 "(51mm) baffles. In addition, EMI
stocks an optional condenser-side air baffle kit for chassis instal-
lation in deeper-than-standard wall sleeves. For fast, trouble-free
installation, know your wall sleeve depth when ordering.
Install the baffles
2.
— Slide the unit back out of the wall sleeve.
Remove both sets of baffles from the kit bag supplied with unit.
Install only one set of left and right side baffles on the condenser
coil by completing steps below:
Choose the proper fitting baffles for your application by verifying
•
selected baffles come in contact with the outdoor louver.
Make sure the baffles are directed inward toward the center of
•
coil.
Secure baffles tightly into the existing holes of the condenser coil
•
using the screws provided.
NOTICE
The correct condenser air baffles must be installed or performances
may be impaired.
Baffles Options
Figure 6
Standard Baffle
Standard Baffle
Standard Baffle
Standard Baffle
Replacement Packaged Terminal Air-Conditioning / Heat Pump
• Installation, Operation, and Maintenance Manual •
The Right Fit for Comfort
12
P/N 240008639, Rev. B [8/16/2011]