CTCSS TONE FREQUENCY (Hz)
67.0
8.25
100.0
123.0
151.4
171.3
189.9
210.7
250.3
69.3
85.4
103.5
127.3
156.7
173.8
192.8
218.1
254.1
71.9
88.5
107.2
131.8
159.8
177.3
196.6
225.7
-
74.4
91.5
110.9
136.5
162.2
179.9
199.5
229.1
-
79.7
97.4
118.8
146.2
167.9
186.2
206.5
241.8
-
77.0
94.8
114.8
141.3
165.5
183.5
203.5
233.6
-
10
13) Transmit Over Beeper (ROGER---MENU 14)
Functions:
sending a beeper to inform the receiver TX is over.
Enter Menu 14th to set ROGER. Default: OFF.
14) Receive Saver (RX.SAV---MENU 16)
Functions:
this feature significantly reduces quiescent battery drain, and you may not
receive the full data burst.
Enter Menu 16t h t o set RX.SAV. Default: OFF.
15) Auto Keypad Lock(AUTOLK & LOCK MD—MENU 18 &MENU 32)
Functions:
in order to prevent accidental frequency change or inadvertent transmission.Various aspects of the radio’s keys and switches may
be locked out.
Enter Menu 32th to set LOCK MD, you can choose to lock All/K+S/KEY/PTT.
When you switch AUTOLK ON, the keypad will be locked automatically if there is no key operation for 5 second.
If the radio is locked, press [ ] key to unlock it. Also you can lock it using [ ] key by manual.
16) Voice Prompt (VOICE---MENU 19)
Functions:
enable/disable voice prompt.
Enter Menu 19th to set VOICE. Default: ON.
17) Power-on Display setting (OPN.SET&VLT---MENU 20&21)
Functions:
choose power-on display mode and edit power-on message
Enter Menu 20th to set OPN.SET. Default: OFF.
OFF: display model version
DC: battery power voltage
MSG: power-on message
Enter Menu 21st to check battery voltage.
18) Repeater Shift setting (OFFSET&S-D---MENU 22&26)
Functions:
repeater stations, usually located on mountaintops or other high locations,provide a dramatic extension of the communication
range for low-powered hand-held or mobile transceivers.
Under VFO mode, you can set the magnitude and direction of the repeater shift.
Enter Menu 22rd to set magnitude of the repeater shift.
Available values: 0.00 ~ 99.95 MHz
Enter Menu 26th to set the repeater shift direction. Default: OFF.
19) Display Channel Name (DIS.NAME---MENU 22)
Functions:
switch channel name display ON/ OFF under MR/CH mode.
Enter Menu 22nd to switch display channel name ON/OFF.
You can edit the channel name directly by programming software.
20) Tone coder & Tone Search Scanning & Tone calling (C-CDC & R-CDC&T-CDC&SEEK 67.0 & D023N—MENU
23&24&25&29&30).
Function 1:
CTCSS/DCS Operation
Many repeater systems require that a very-low-frequency audio tone be superimposed on your FM carrier in order to activate the repeater.
This helps prevent false activation of the repeater by radar or spurious signals from other transmitters.
Enter Menu 23th/24th/25th to set TX&RX Tone coder/ RX Tone coder/ TX Tone coder.
1) Press [ ] key to select CTCSS/ DCS/ OFF. After you choose CTCSS/ DCS,press [ ] / [ ] key to choose the right group you
need.
2) Press [ ] key to select DCS direction.This transceiver has 50 groups CTCSS,104 groups normal/inverted DCS.
