�ETEvlS
Trouble shooting guide
Troubles
Solution
No Electrical Source
The operating time becomes short, even
the battery is fully charged.
Not able to communicate with the
transceivers of the same group.
The voice of another group can be heard.
Other radios can not receive the TX
signals or receive signals in a low
volume.
Noise is always heard.
08
1
•
The battery has been exhausted.
Replace or recharge the battery.
•
The battery is installed incorrectly.
Remove it and install again.
•
Replace the battery.
•
Confirm the QT/DQT is the same.
The distance is outside of range.
•
Change all QT/DQT of the group.
•
Switch the volume knob to the highest
level
•
The microphone may be damaged,
send it to the local dealer for check.
•
The distance is outside of range.
Turn on the radio in nearer range and
try again.
�ETCvlS
Specifications (US)
Model number
Operating Frequency
Output
Channel
Channel
Range (MHz)
Power
Spacing (KHz)
Protocol
12.5KHz
CTCSS/DCS
RT67
462.5500-462.7250
,;;,0.5 W
• FCC (FRS)
CH.No
CH.Freq.(MHz)
CTCSS/DCS CH.No
CH.Freq.(MHz)
CTCSS/DCS
462.6250
114.8
9
462.7125
D026N
2
462.7250
114.8
10
462.5500
D026N
3
462.5625
114.8
11
462.5750
D026N
4
462.5875
114.8
12
462.6000
D026N
5
462.6125
114.8
13
462.6500
D026N
6
462.6375
114.8
14
462.6750
D026N
7
462.6625
114.8
15
462.7000
D026N
8
462.6875
114.8
16
Note: Above channels are FRS license free channels.
1
09
