iBreeze BPAP Systems User Manual
21
10 Device Alert
There are 4 types of alerts described here:
Alert 0
: Gray bottom white tips, no light, no sound, always display, disappear until
the prompt condition not met.
Alert 1
: Orange bottom white tips, blue-ray flashing, with sound, always display,
disappear until the prompt condition not met.
Alert 2
: Red bottom white tips, blue-ray flashing, with sound, exclusive alarm until
the user opens the alert to confirm or press the Therapy On/Off key.
Notification
:
White reminder message, no light, no sound, after the
corresponding process, the message automatically disappears.
Alert Summary Table: The following table summarizes the alerts.
Alert
Type
Possible Cause
Action
Input voltage is
abnormal, please
check!
Alert 2
Power Adapter with the
wrong type, resulting in
voltage is too high or too
low
Use the Power
Adapter provided by
Resvent.
SD card write/read
underway, do not
remove the SD card,
do not cut off the
power.
Notification
1. Insert SD card during
data synchronization;
2. Input the
configuration on the SD
card.
No action.
SD Card Removed.
Notification
1. No SD card in the
device.
2. SD card has been
removed.
Reinsert functional
SD card.
SD Card Full, Please
replace the SD Card.
Notification
In Standby mode, SD
card storage space only
200M
Replace the SD card
or clean the data
after export the data
in the SD card.
SD card can’t be
written, please unlock
and insert again.
Notification
The SD card is
read-
only and can’t be
written.
Remove the SD
card, unlock and
insert it again.
SD card error, please
remove and insert
again.
Notification
SD card failure, may be:
1.SD card can’t read
and write.
2.SD card read and
write data errors.
Remove SD Card,
Reinsert or replace
with a new card.
Software update
underway, Do not cut
off the power!
Notification Software update.
No action.
