1969 FIREBIRD
• Above the control panel opening, cut out the center and down to the control opening of the block off, as shown for the center louver assembly.
Follow dash lines in drawing.
• Feed center dash vent adapter from behind aligning screw holes from front and mount using #10 screws.
• Installing the center louver vent requires a small amount of cutting to the dash support. If you haven’t already, remove the main bezel.
• Locate the center louver assembly and (2) #6 x 1” pan head philips screws.
• Place louver assembly over the trim bezel and drill (2) 1/8” dia holes using the trim bezel as guide.
• Attach louver assembly using (2) #6 screws.
CENTER LOUVER
Bezel
6” WIDE
3/8”
1 1/2”
P A G E
0 1
Summary of Contents for FIREBIRD TRUMOD 1969
Page 1: ...1969 FIREBIRD INSTALL MANUAL 2020 RESTOMOD AIR...
Page 8: ......
