Press
The Arm and Part-Arm LEDs will illuminate and all
Zone, Fire and tamper LEDs will flash.
The system is now in Programme Mode
Use the and buttons to scroll through
the programming menu. Press to select the
displayed programming function or sub-menu.
Note: After programming all required functions press
to leave Programme mode and return to Standby.
User Setup
Scroll through the top level programming menu until
’1. USER SETUP’
is displayed and press .
Use the and buttons to scroll through
the programming menu until the required user to be
configured is displayed and press .
Note: After configuring all required users press
to return to the top level programming menu.
Users 1- 6
Default setting: not programmed
Scroll through the menu until the required User to be
configured is displayed and press .
User Access Code
Scroll through the menu until
‘:1 Access Code’
is
displayed. The current setting will also be displayed.
To change the setting press .
Enter the new 4 digit Access Code and then
Press to save and exit, or
Press to exit without saving.
Record User Message
This enables each User to record a short 4 second
message for use with the Latch Key facility.
e.g. “system disarmed by User-1”.
Scroll through the menu until
‘:2 Record User
Message’
is displayed.
To record a new message press .
Press
to start the voice recorder, (max
duration: 4 seconds). Once completed the
recording will automatically be played back, or
Press
to exit without changing.
Note: After recording the message, press
to stop the recorder and cancel any remaining
message time.
Replay User Message
Scroll through the menu until
‘:3 Replay User
Message’
is displayed.
Press
to replay the user message.
Press
to return to the top level User-Setup
menu.
Master User
Default setting: 1 2 3 4
Scroll through the menu until
’1-7 MASTER USER
SETUP’
is displayed and press .
‘:1 Access Code’
and the current setting will be
displayed.
To change the setting press .
Type in a new 4 digit Access Code, and then
Press
to save and exit, or
Press
to exit without saving.
Press
to return to the top level User-Setup menu.
Programming Instructions
22
?
?
?
?
,
,
Master User Access Code
ESC
ESC
ESC
1
3
ESC
User 2
User 3
User 4
User 5
User 6
:1 Access Code
xxxx
Enter Access
Code:
:2 Record
User Message
:3 Replay
User Message
1-1 USER 1 SETUP
:1 Access Code
xxxx
1-7 MASTER USER
SETUP
PROGRAM MODE
Code:
Start. . .
YES->1 NO->3
1. USER SETUP
Enter Access
Code:
ESC
ESC
ESC
