www.response-technologies.com
- 18 -
©Response Technologies, Ltd.
Revised: January 9, 2015
Section 5
Console Configuration
RADIO CONFIGURATION
The system radio is configured and tested for proper operation during assembly. Only
qualified radio technicians should attempt to configure or modify the radio system.
ALWAYS TEST the radio for proper operation after any changes or modifications.
Undetected errors in radio configuration may disrupt the ability of your system to
broadcast alarms.
The
PTT High
setting allows the user to configure the PTT setting to be active high
(selected) or active low (unselected).
The
PTT Hold
setting allows the user to configure the PTT setting between Hold PTT to
Transmit (selected) or Release PTT to VOX (unselected).
The
Radio Always Powered
setting allows the user to have the radio powered when the
SCOUT
is powered (selected) or to only power up during sensor activation notification
(unselected). If this option is unselected a
Radio Power Delay
should be used.
The
Radio Channel Clear Time
setting allows the user to enter the desired time interval
to delay radio transmission should the radio channel be busy.
The
Radio Power Delay
setting allows the user to enter the desired time interval to delay
radio transmission to allow the radio to power up completely. This option is only needed
if the radio is not always powered.
