STEP 1: Fitting the inCourage Comfort Vest
Inspect the Comfort Vest:
Note:
Prior to use, the vest should be inspected for any sign of defects. If any
of the following defects are found, please contact a RespirTech Customer Care
Representative at
1-800-793-1261
for immediate vest replacement:
1.
Any size hole found in the vest (inner layer, outer layer, seams, or vest ports).
2.
Any stitching that has become loose or frayed on the vest.
3.
Any damage to the buckles or straps that restricts the function of the strap system.
Adjust the Comfort Vest Straps:
We have taken careful consideration in supplying you with the appropriate size vest
based on your information. Please take a moment and review the fitting instructions
carefully and consult your physician if any discomfort develops.
NOTE:
We recommend a thin layer of cotton clothing to be worn under the vest
for best comfort.
To loosen straps:
Lift the back of the buckle.
To tighten straps:
Hold the buckle and pull the end of the strap
to the patient’s right.
1.
These instructions refer to the
three colored QuickFit tabs:
blue, white, and yellow.
2.
Before putting on the vest, preset
the QuickFit tabs to the pre-therapy
position by placing the blue tabs
over the yellow tabs.
SYSTEM SETUP
8
inCourage
®
Airway Clearance Therapy | INSTRUCTION MANUAL
Summary of Contents for inCourage
Page 1: ......